EUTECH INSTRUMENTS CADMIUM EPOXY Wartungshandbuch PDF herunterladen (Seite 57)

...setting the standard again and again

Handheld Meters ▼ MultiParameter

Waterproof and dustproof

with IP67 rating

Toggle between pH/temperature

and DO/temperature

▼

For the convenience of three meters

in one!

Backlit display

▼

With adjustable brightness—ideal

for viewing readings in dark areas

Automatic temperature

compensation (ATC)

Display probe diagnostics

▼

View slope, offset and millivolt

values for both pH and DO

°C/°F selectable

pH features:

Push-button pH calibration at

five points with automatic buffer

recognition

DO features:

No meter warm-up required

▼

Galvanic DO probe design lets you

take measurements immediately

without the typical 15-minute to

4-hour wait!

Easy-to-service, low-maintenance

DO probe

▼

Replaceable membrane cap

assembly makes DO probe

maintenance hassle-free

Salinity and pressure compensation

▼

Key in values and meter

automatically compensates for

increased accuracy

Independent 100% and

zero adjustment calibrations

▼

High accuracy over the full meter

range

Offset adjustment capabilities

▼

Calibrate your meter to a known

work standard or titrimetrically

determined value

pH/DO 300 Meter

Measure pH, dissolved oxygen, and temperature with

one waterproof, dustproof meter that FLOATS!

Right: pH/DO 300 meter

with pH and DO electrodes.

Far right top: Adjustable

backlit display is ideal

for taking readings

in dark areas.

Far right bottom:

Waterproof, IP67-rated

housing floats!

Specifications

Mode pH DO in mg/L (ppm) DO in % saturation Temperature

Range

–2.00 to 16.00 pH 0.00 to 20.00 mg/L 0.0 to 200.0% 0.0 to 50.0°C; 32.0 to 22.0°F

Resolution

0.01 pH 0.01 mg/L (ppm) 0.1% 0.1°C; 0.1°F

Accuracy

±0.01 pH ±1.5% full-scale ±1.5% full-scale ±0.3°C; ±0.5°F

Calibration

Up to 5 points:

pH 1.68; 4.01,

7.00, 10.01, 12.45

One or two points

(100% and 0% saturation); plus

separate mg/L (ppm) offset

Offset up to

±5°C or °F

Ordering Information

Cat. no. Description Included

WD-35632-02

pH/DO 300 meter only Meter and batteries

WD-35632-00

pH/DO 300 meter

Meter, pH electrode 35805-23, DO probe 35640-50,

with probe 500 mL of electrolyte solution, and batteries

WD-35632-60

pH/DO 300 meter kit

Meter, pH electrode 35805-23, DO probe 35640-50, pH “Singles” pouches,

500 mL of electrolyte solution, rinse bottle, five replacement membranes,

membrane replacement tool, batteries, and hard carrying case.

WD-35805-23 Replacement pH electrode, 10-ft cable

WD-35640-50 Replacement DO probe, 10-ft cable

Probes

WD-35641-52 DO probe, 25-ft cable

WD-35641-54 DO probe, 50-ft cable

WD-35641-56 DO probe, 100-ft cable

meter only

Temperature compensation: automatic from 0 to 50°C

Operating temperature: 0 to 50°C (32 to 122°F)

Salinity correction

Range: 0.0 to 50.0 ppt

Resolution: 0.1 ppt

Method: key in manually and automatic

Barometric pressure correction

Range: 500 to 1499 mm Hg, 66.6 to 199.9 kPa

Resolution : 1 mm Hg, 0.1 kPa

Method: key in manually and automatic correction

DO probe type: galvanic

Backlit display: eight levels of brightness

Power: four 1.5 V AAA batteries (included),

>100 hours continuous use. Use of backlit display

decreases battery life.

Dimensions

Meter: 7.5"L x 3.75"W x 2.25"H (19 x 9.5 x 5.7 cm)

Boxed: 9.2"L x 9.2"W x 2.75"H (23 x 23 x 7 cm)

Weight

Meter: 1.0 lb (0.5 kg); Boxed: 2.0 lb (0.9 kg)

http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

EUTECH INSTRUMENTS CADMIUM EPOXY Wartungshandbuch Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern EUTECH INSTRUMENTS CADMIUM EPOXY