
... setting the standard again and again
®
8
pH/ORP ▼ Testers
ORPTestr
®
10 and ORPTestr
®
10 BNC
Waterproof, dustproof tester for convenient
testing of oxidation-reduction (REDOX) potential
Waterproof, dustproof housing
▼
IP67-rated housing protects your
tester even in harsh field conditions
Double-junction electrode design
▼
For significantly longer electrode
life, especially in applications with
harsh chemicals (ORPTestr 10 only)
Microprocessor-based functions
▼
For fast, stable readings
Offset of ±150 mV
▼
Keypad adjustment to calibration
solution or to an established work
standard
Replaceable electrode
▼
Reuse the same tester body over
and over
Hold function, Auto-off
function, error messages
The microprocessor-based Oakton
®
ORPTestrs
are ideal for oxidation-reduction tests. These
pocket-sized instruments are reliable over
their wide –999 to +1000 mV range. The
IP67-rated waterproof, dustproof housing
protects your instrument from rugged
field or plant environments. And it floats,
so you won’t lose your tester by dropping
it into a tank or pond!
The waterproof ORPTestrs feature
microprocessor-based, all push-button
operation. All functions are accessible
from the keypad. Features include Hold
function, Auto-off, and error messages.
Lanyard loop lets you attach a cord.
Thermoplastic body offers good chemical
compatibility and durability. The rugged
thermoplastic body, and platinum, glass
and Kynar
®
reference junction offer good
chemical compatibility and durability.
Screw cap battery compartment with
tight seal ensures waterproof and
dustproof protection.
Applications
General: Ideal for ORP applications, which are typically
found in the –999 to +1000 mV span.
Industrial: Chromate reduction (+200 mV approx);
Cyanide oxidation (+300 mV approx);
Pulp bleaching (+900 mV approx)
Water treatment: Monitor ozone systems (+900 mV);
Check free chlorine activity (+600 mV) in pools,
spas, and cooling towers; Water purification and
drinking water (+300 mV); Aquarium monitoring;
Water pollution monitoring.
Tactile button keypad
with positive “clicks”
confirming your button
selection
Double-junction
electrode
allows for long
electrode life,
even in harsh
applications
IP67-rated waterproof, dustproof housing floats!
Electrode sensors are easily replaceable
without affecting waterproof rating
Accessories
WD-35624-45 Belt-loop waterproof carrying case; holds one waterproof tester
(order separately). Snap lock fastens case around your belt; Velcro
®
seal secures tester.
Pictured at right. 5.5"L x 2"W x 7.75"H (14 x 5 x 20 cm).
WD-35650-09 Replacement electrode sensor for ORPTestr 10
WD-35805-13 ORP electrode; single junction, epoxy-body, gel-filled electrode with
3-ft cable. For use with ORPTestr 10 BNC
WD-09377-16 Replacement batteries; 1.5 V. Pack of 6
Lanyard
loop on top
of battery
cap lets you
attach a cord
to prevent
tester loss.
meter only
Specifications
Mode ORPTestr
Range
–999 to +1000 mV
Resolution
1 mV
Accuracy
±2 mV
Calibration
Offset adjustment ±150 mV; brings ORPTestr into agreement with your work standard
Ordering Information
Catalog number Description Included
WD-35650-10
ORPTestr 10 Tester with double-junction electrode module and batteries
WD-35650-14
ORPTestr 10 BNC Tester with BNC connection and batteries (electrode not included)
35650-14
35650-10
BNC connection
lets you connect
a wide variety of
electrodes
Operating temperature: 0 to 50°C (32 to 122°F)
Special functions: On/Off or Auto-Off after 8.5 minutes;
Hold; Calibrate and Confirm
Power: four 1.5 V alkaline batteries (included). Eveready
®
A761 or LR44 equivalent replacement
Dimensions
Meter: 6.5"L x 1.5"dia (16.5 x 3.8 cm)
Boxed: 7.25"L x 2.75"W x 1.875"H (18.4 x 7 x 4.8 cm)
Weight
Meter: 3.25 oz (90 g); Boxed: 6 oz (170 g)
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682
Kommentare zu diesen Handbüchern