EUTECH INSTRUMENTS CYBERCOMM 5000 FOR CYBERSCAN 5000 Bedienerhandbuch PDF herunterladen (Seite 13)

Instruction Manual CyberScan PC5500/ 5000

3.3 Conductivity Probes

This meter allows you to use two types of conductivity cells: the 2-cell

conductivity cell with dual pin connector and the 4-cell conductivity

cell with DIN connector. If both a 2-cell and a 4-cell conductivity probe

are connected, the meter will read the 4-cell conductivity probe.

1. Carefully remove the protective

cover from the end of the

conductivity cell. Before using your

conductivity cell, soak it for 5 to 10

minutes in distilled or deionized

water.

2. Connect the 2-cell conductivity cell to the 2-cell jack. Install the

ATC probe in the ATC jack.

Connect the 4-cell conductivity cell to the 4-cell jack. The 4-cell

conductivity cells have built in ATC probes. Therefore, there is

no need to install a separate ATC probe.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 181 182

Keine Kommentare

EUTECH INSTRUMENTS CYBERCOMM 5000 FOR CYBERSCAN 5000 Bedienerhandbuch Seite 13