EUTECH INSTRUMENTS SALT 6 PLUS Bedienerhandbuch PDF herunterladen (Seite 27)

Instruction Manual Salt 6

6.5 Restore Factory Default Values

This function allows you to reset all parameters to factory default settings. This

clears all calibration data and any other setup functions you might have

changed.

IMPORTANT: Once activated the meter’s settings and calibration data will be

erased and always exercise caution as meter reset is not reversible.

1) Enter the advanced setup as described

in Section 6.1.

2) Press ▲ or ▼ key until [UrSt] appears

on the LCD. Press ENTER key.

3) Press ▲ or ▼ key to select either

[Yes] or [no].

4) Press ENTER key to select.

5) The meter will go back to

measurement mode after the switch-on

initialization as shown in figure of

Section 3.6.

HOLD

ENTER

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Keine Kommentare

EUTECH INSTRUMENTS SALT 6 PLUS Bedienerhandbuch Seite 27