EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Bedienerhandbuch Seite 33
- Seite / 52
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
30
P4.1: READY Indicator and auto endpoint function
Program P4.1 lets you select “READY indicator on” to
indicate when the reading is stable*, or select “READY
indicator off” for faster meter response.
pH 310 meter only: Program P4.1 also lets you switch the
Auto endpoint function on or off. Select auto endpoint on to
“hold” the reading when it is stable for more than 5 seconds.
The display automatically freezes, and the HOLD indicator
appears on the left side of the display. Press the HOLD key
to release the display and access other functions. Select
auto endpoint off to deactivate this feature.
From measurement mode
1. Press SETUP key to enter Set Up mode.
2. Press the MI/▲ or MR/▼ keys to scroll through
su/jointfilesconvert/333898/bgroups until you view parameter P4.0.
3. Press the ENTER key to select parameter 4.1.
4. Press the MI/▲ or MR/▼ keys to select the
configuration you require.
• OFF switches the READY indicatory off.
• ON switches the READY indicator on.
• pH 310 meter only: ON and HOLD together switches
the auto endpoint feature on.
5. Press the ENTER key to confirm selection and to
proceed to step 4 of P4.2. Press the CAL/MEAS key to
return to measurement mode.
NOTES:
Meter default is set for READY indicator on and auto endpoint function off.
*The READY indicator appears and the reading holds until the measured value exceeds the tolerance (
±
0.02 pH;
±
0.8 mV <400 mV;
±
1.2 mV > 400). Then the READY annunciator turns off.
Figure 29 - P4.1: Selecting READY
function)
- Instruction Manual 1
- Preface 2
- TABLE OF CONTENTS 3
- 1 INTRODUCTION 4
- -8.8.8.8 5
- 2.2 Keypad 6
- 2.3 Inserting the Batteries 7
- Electrode Holder 10
- 3 CALIBRATION 11
- 3.3 pH Calibration 13
- Figure 12 - Temperature 16
- 4 MEASUREMENT 17
- 4.2 Manual Temperature 18
- Compensation 18
- 4.3 Taking Measurements 19
- 5 HOLD FUNCTION 20
- 6 MEMORY FUNCTION 21
- 6.2 Memory Recall 22
- 7 ADVANCED SETUP FUNCTIONS 24
- Subgroups 25
- P3.2 pH electrode slope 26
- 310 meter display only 29
- 7.5 P4.0: Unit configuration 32
- 8 PROBE CARE AND MAINTENANCE 41
- 9 TROUBLE SHOOTING GUIDE 43
- 10 ERROR MESSAGES 44
- 11 SPECIFICATIONS 45
- 12 ACCESSORIES 46
- Calibration Solutions 47
- SETTINGS 49
- 14 WARRANTY 50
- 15 RETURN OF ITEMS 51
Verwandte Produkte und Handbücher für Messen, Testen & Steuern EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER
Messen, Testen & Steuern EUTECH INSTRUMENTS WATERPROOF C401 COLORIMETER Bedienerhandbuch
(44 Seiten)
(44 Seiten)
Messen, Testen & Steuern EUTECH INSTRUMENTS CYBERSCAN PH500 PHORP BENCH METER Bedienungsanleitung
(8 Seiten)
(8 Seiten)
(4 Seiten)Manhattan 161725 2150 Speaker System - Quick Install (Multi) Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Akustik Manhattan 161725 2150 Speaker System - Quick Install (Multi).
Wir stellen 1 PDF-Handbücher Manhattan 161725 2150 Speaker System - Quick Install (Multi) zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Kommentare zu diesen Handbüchern